|
|
JTAG Emulator/JTAG ICE
The JTAG Emulator (JTAG ICE) high-speed JTAG Emulator, leverages on-chip JTAG Emulation to provide you with the power to do board bring-up (Debug new hardware and boot code), program FLASH devices , and do JTAG Manufacturing Test on you PowerPC, MIPS, XScale or ARM based target system over the fast convenient JTAG debug interface.
JTAG Emulator (ICE) (PowerPC, MIPS, ARM and XScale)
Uses JTAG or On-Chip Emulation to provide standard run control features like: Reset, Go, Halt, Step, Read/Write Memory and Registers, Dump Cache and MMU information, Program, Erase, Verify and ID FLASH devices and many others. Guardian-SE can do full Source Level JTAG debugging using Open Source Debuggers like DDD, Insight, and others or with our High End GUI Agile-DB.
JTAG FLASH Programmer (PowerPC, MIPS, ARM and XScale)
Provides fast, flexible and reasonably priced JTAG FLASHProgramming. (JTAG FLASH Programming is also known as On-Chip FLASH Programming or In-Circuit FLASH Programming).
By providing a high speed JTAG connection, Guardian-SE lets you erase, program, verify and even ID FLASH devices on your target system. Guardian-SE Supports all popular FLASH devices from: AMD, intel, Atmel, Spansion, Fujitsu, Micron Technologies, NEC, Sharp, Toshiba, ST Microelectronics and Silicon Storage and others.
JTAG GDB Debugger(PowerPC, MIPS, ARM and XScale)
Embedded Toolsmiths' network-based JTAG Emulator
works with popular Open Source tools like GDB, DDD, Insight and others--or our own Agile-DB JTAG debugger.
Board Bring Up and Manufacturing Test(PowerPC, MIPS, ARM and XScale)
The perfect tool for bringing up new hardware and firmware and for performing manfacturing test. With access to all on-chip registers and devices, a powerful command language complete with macros, Guardian-SE is the right tool for the job at a price you can afford.
Guardian-SE set up is so easy that you can start debugging you
application right away--instead of wasting time on tool set up issues.
Best of all when you have to find a really tough bug; Guardian-SE has
advanced features you need to get your job done
Benefits:
•
Easy to Configure and Setup
• Allows you to "Hot Plug" into your Ttarget System
•
One Unit Supports PPC, MIPS, XScale and ARM Processors
•
Works With All Versions of GDB
•
Works With DDD, Insight, DevRocket, Time Storm and Other Eclipse Based
Tools
•
Uses 10/100 Ethernet for Maximum Debug Speed
• Built-In "terminal server" for Target Serial I/O
•
Built-In Disassembler
•
Full MMU/TLB Translation--Including LINUX
•
C/C++/ASM DEBUGGING Using GDB Based Debuggers
•
Powerful Command Line Interface
•
Target Register Detail Via the
command line
•
Custom Register Creation
•
Powerful Run Control Features
•
Fast, Flexible Downloads
•
Powerful Hardware and Software Breakpoints
•
Perform Target Operations Even While Running
•
FLASH Programming
• Complete Help System and
user Documentation
Please
follow the links below for more information:
»Supported FLASH
Devices
|
